 |
||||||||||||||||||||
|
||||||||||||||||||||
 |
|
|
|
|
|
|
|
|
|
|
|
|||||||||
| :: Products :: |  |
 |
These Positive displacement reciprocating pumps are provided with stroke adjustment mechanism to vary flow of liquid as per requirement. Accuracy of flow is controllable within + 1%. Of the two parts of the pump, the Drive End mechanism is enclosed in a housing filled with oil to minimise wear and tear. The Liquid End, being of critical importance, is made of material suitable for the liquid to be pumped. These pumps are self lubricating type, capable of pumping fluids of any viscosity at constant pressure, irrespective of the suction pressure variations. Pumps for continuous flow are also designed and supplied by us as per your specification. Other products : Pressure Relief Valve, Pulsation Dampner, Non Return Valve, Suction Strainers, back Pressure Valve, High / low speed Agitator. |
||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||
 |
The driving member in this pump is a flexible diaphragm. The advantage of this arrangement is elimination of all gland packings and seals which are exposed to the liquid being pumped. This is an important feature when used with hazardous, toxic or corrosive liquids. Low capacity diaphragm pumps designed for metering service employs a plunger working in oil to actuate the diaphragm. Pumps of both single and double diaphragm can be offered. Diaphragm pumps with diaphragm rupture mechanism is also offered by us. Other products : Pressure Relief Valve, Pulsation Dampner, Non Return Valve, Suction Strainer, Back Pressure Valve, High/low Speed Agitator. |
||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||
 |
Metering Pumps with Auto Controller
|
||||||||||||||||||||||||||||||
The system consists of the following : Pump / Motor / Converter / Digital controller / Proximity switch. The pump can be controlled remotely giving an advantage while controlling the discharge as per your process needs. The stroke control can be varied such as Process temp., Pressure, Main Flow Rate, Level of liquid, Humidity, Viscosity, Concentration etc. Accuracy of flow is within + 1%. The controller is used to rotate the thimble with the help of converter. |
|||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||
 |
Skid Mounted Chemical Dosing System :
|
||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||
 |
Hydrostatic Testing Pumps :
|
||||||||||||||||||||||||||||||
| Model | FCP / 5011 / 5017 / 5030 / 5040 |
| Pump type | Plunger |
| Capacity | 0 - 5,000 LPH |
| Discharge pressure | 0 -400 kg / sq.cm. |
| M.O.C.(wetted parts) | SS304 / SS316 |
| Pressure relief valve | Pressure gauge |
| Shut-off valve | Dampner |
| Strainer | Nipple |
| DOL Starter | Mounting trolley |
| Features : • Portable, stand-alone system. • Low power consumption. • Small foot print. • No vibration. • Direct connection to system. • No manual intervention. • Highly favourable size : pressure ratio. |
|
Dosing System With Fixed Stirrer :
| Model | FCP 5011 / 5017 / 5030 / 5040, FCH 5011 / 5017 / 5030 / 5040 |
| Pump type | Plunger |
| Capacity | 0 10,000 LPH |
| Discharge pressure | 400 kg / sq.cm. |
| Stirrer | As per tank size |
| RPM of stirrer | As per requirement |
| Dia. / Swing dia | As per specified tack capacity |
| M.O.C.(liquid head) | As per liquid compatibility. |
| Accessories : | |
| Dampner | Strainer |
| Pressure relief valve | Tank |
| Drain valve |
These are suitable for liquids which require continuous stirring. This saves the cost as a separate stirrer and of monitoring. Because of the simultaneous activities of dosing and stirring, there is saving on power consumption.
| Model No. | FCP 5011 / 2H ( Duplex ) FCP 5011 / 3H ( Triplex ) FCP 5011 / 4TH ( Quadruplex ) |
| Capacity | As per requirement. |
| Discharge pressure | As per requirement. |
| M.O.C.( liquid head ) | SS304 / SS316 / Alloy20 PP / PTFE / Hastalloy B / C |
| Motor | 3 Ph. 1440 RPM |
| End Connection | Threaded / Flanged |
Note :
* Higher capacity & pressure can also be supplied.
* Multiple heads of different capacities and pressures, running in tandem,
can also be offered.
* Multiple head arrangement with fixed stirrer can also be supplied.
Specifications :
| Model No | FCP 5011 / 5017 / 5030 / 5040 |
| Pump Capacity | 0 - 10,000LPH |
| Discharge pressure | 0 - 400 lg / sq.cm. |
| M.O.C. (wetted parts) | SS304 / SS316 /Alloy20 /PP/PTFE/GFT/ Hastalloy B/C |
| Model No | FCH 5011 / 5017 / 5030 / 5040 |
| Capacity | 0 - 10,000LPH |
| Discharge pressure | 100 kg / sq.cm. |
| M.O.C.(wetted parts) | PP / PTFE / Hastalloy B/C |
| Diaphragm | PP / FTFE / GFT |
| We design Jacketed Pumps for maintaining temprature of liquid being pumped. We offer Teflon Coated Jacketed Pumps for Highly Corossive Fluids. | |
Specifications :
| Electrical | 230 v A.C. ( + or -20%) 50HZ | ||||||||||||
| Suction tubing | 4/6 mm | ||||||||||||
| Discharge tubing | 4/6 mm | ||||||||||||
| Dosing rate | 4/6/12 lph at 4 kg/cm2 | ||||||||||||
| Strokes / Minute | Max. 400 Min. 50 | ||||||||||||
| Fuse | 600 m Amp | ||||||||||||
| Level switch interlock | Noramlly open | ||||||||||||
| Relay output | Normally open. Closes in case the pump stops for any reasons | ||||||||||||
|
|||||||||||||
| Features: | |
| • Wetted parts suitable for most aggressive chemical. • Air bleed arrangement built into pump head. • PTFE double ball NRV s ensure long life. • Wide operating voltage range viz 180-280V. Automatic voltage compensation to ensure dosing consistency. • Level switch inter lock facility available. • Relay output : Potential free change over contact which activates in the event of pump malfunction. • Fault L.E.D.: Gives visual indication of blown fuse, low level in chemical tank or over heating of pump. |
|
| Next |
|---|
| • 3 M suction & discharge tubing • Suction filter cum foot valve • Injection / Back pressure assembly |